ECP TANKER PUMP ROOM FLOODING	Doc No.: ECP 16-00 Revision: 01 Date: 15 Oct 2024 Issued by: DPA Approved by: MD

.

Flooding in a Tanker Pump Room

In case of flooding in a tanker pump room, the primary procedure involves activating the bilge pumps, utilizing emergency suction systems, and ensuring proper ventilation to remove accumulated water and maintain a safe environment.

Here's a more detailed breakdown of the procedures:

1. Immediate Actions & Assessment:

• Alert the Bridge:
  Immediately notify the bridge of the flooding situation, including the location and severity.
• Assess the Situation:
  Determine the source and extent of the flooding, and identify any potential hazards.
• Safety First:
  Ensure the safety of all personnel in the pump room and evacuate if necessary.
• Check Bilge Level Alarms:
  Ensure that bilge level alarms are functioning correctly and sounding as expected.

2. Bilge Pumping Procedures:

• Activate Bilge Pumps:
  Initiate the operation of the main bilge pumps to remove the water.
• Utilize Emergency Bilge Suction:
  If the main pumps are insufficient, activate the emergency bilge suction system, which may be located on a central cooling pump.
• Ensure Proper Ventilation:
  Run the pump room exhaust fans on high speed and consider using portable fans to introduce fresh air into the bilges.
• Check Strainers and Valves:
  Ensure that all valve, strainer, and pump casing drain plugs are tight.
• Interconnected Systems:
  Bilge and ballast systems may be interconnected, so consider using ballast pumps to assist in pumping out water.

3. Post-Flooding Procedures:

• Inspect and Repair:
  After the flooding is contained, inspect the pump room for any damage and make necessary repairs.
• Clean Bilges:
  Regularly clean and maintain the pump room bilges to prevent future accumulation of residues.
• Periodic Testing:
  Ensure that the bilge pumps and emergency systems are regularly tested and maintained.